Sunrise Wake-up Clock Model: WS902 USER MANUAL
EN EN INTRODUCTION Sunrise Wake-up Clock Model: WS902 USER MANUAL CONTENTS 1 Contents....................................................................1 Introduction ............................................................. 22 Overview................................................................... 22 Front View.............................................................. 32 Bottom View........................................................... 32 2 LCD Display..................................
EN INTRODUCTION BOTTOM VIEW Thank you for selecting the Oregon Scientific TM Sunrise Wake-up Clock 2 Our body clock is often not in sync with the demands and rhythm of modern life. Our biological clock is affected by external cues, such as sunlight. Light at dawn stimulates production of cortisol, which gets the body ready to work and wake up.
EN 4. While continuously pressing on UNLOCK COVER tab, place right hand around the side of the product. Push in the side of the cover (area above tab and hook) and lift up to release cover. (Left handed individuals can use right thumb and left hand if more comfortable). CLOCK MANUALLY SET CLOCK 1. Press SET CLOCK to enter setting mode. 2. Press + or - to change the settings or press and hold + / – to rapidly change the settings. 3. Press SET CLOCK to confirm and move to next setting.
EN ALARM WITH WAKE UP LIGHT LCD BACKLIGHT To activate / deactivate wake up light: • Slide WAKE UP LIGHT switch to ON / OFF. When wake up light has been activated, will be displayed next to ALARM on the LCD screen. To adjust brightness: • Slide DISPLAY BRIGHTNESS switch to LOW / HIGH. RESET 1. Remove and reinsert the batteries. 2. Press RESET to return to the default settings. NOTE Light will fade-in (gradually increase in brightness to maximum) 20 minutes prior to set alarm time.
EN TROUBLESHOOTING The below table lists out some of the problems you could encounter. If you are unable to solve the problem, contact the Customer Care Centre in your country. Contact us via www2.oregonscientific.com/service/support.asp Problem Possible cause Solution / Remarks The unit does not work Power supply? Ensure plug has been properly inserted into the wall socket Ensure there is no power failure.
EN FCC STATEMENT PRECAUTIONS • Do not subject the unit to excessive force, shock, dust, temperature or humidity. • Do not cover the ventilation holes with any items such as newspapers, curtains etc. • Remove dust regularly with a dry cloth. Accumulated dust poses a potential fire hazard. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not clean the unit with abrasive or corrosive materials.
