Wake-up Vibration Alarm Model : VR101 User Manual VR101 English Cover R8 OP 1 7/15/04, 10:05 AM
EC-Declaration of Conformity ................................. 9 Introduction .............................................................. 2 Key Features ............................................................ 2 Front (and Back) View ........................................... 3 Installing the Batteries ........................................... 4 Safety and Care Instructions .................................. 5 Safety Precautions .................................................
EN INTRODUCTION KEY FEATURES Thank you for selecting the Oregon Scientific TM Wake-up Vibration Alarm (VR101) as your product of choice. This device is designed to give you many years of reliable service. The vibration device is a wireless wake-up vibrating device with an 8-minute snooze function. This vibration device can work with the following Oregon Scientific clocks: • RM818P • RM998P • RMR939P NOTE Keep this manual handy as you use your new product.
EN FRONT (AND BACK) VIEW The VR101 Vibration device features: 1. LED Indicator • When flashing green it shows data is transmitting; when flashing red it shows the battery is low). 1 2 2. Back cover • Remove the back cover by turning counterclockwise to see the Alarm switch, Reset hole and battery compartment. 3. Reset hole • Returns all settings to default values. 4.
EN INSTALLING THE BATTERIES • Battery compartment • To remove the back cover, turn counter-clockwise. • The unit uses 2 AA / UM-3 1.5V batteries for power.
GETTING STARTED SAFETY PRECAUTIONS UNPACKING THE PRODUCT Please observe the following safety precautions when setting up and using this product. When you unpack your clock, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing. • Heat sources-Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat-generating products.
EN NOTE Replace the batteries whenever the LED indicator turns to a red color as this color shows that the batteries are low. Replace all the batteries at the same time - it is dangerous to mix old and new batteries. NOTE The vibrating device is powered by two "AA" 1.5V alkaline batteries, which are included. It is also compatible with rechargeable batteries (not included). Contact your local waste disposal authority for instructions on how to dispose of used batteries.
While the alarm goes off, press the SNOOZE / LIGHT button on the main unit to stop the Alarm and enable the Snooze function. When the Snooze function is enabled, the Snooze alarm will last between 8 and 9 minutes. Also, the snooze function will be disabled if 1) the clock time is changed; 2) or the alarm ON / OFF button is pressed. Simply insert a blunt stylus to reset the unit's settings. TROUBLESHOOTING GUIDE NOTE When the Snooze function is enabled, the Bell Icon will be flashing at 1Hz.
EN • Take precautions when handling all battery types. They can cause injuries, burns, or property damage as a result of contact with conducting materials, heat, corrosive materials or explosives. Remove the batteries before storing the product for long periods of time. SPECIFICATIONS Dimensions (diameter x height): 90 x 21mm (3.54 x 0.83 inches). Weight: 80g (0.18 lbs) without batteries. Alarm Duration: 1.5 minutes. Power supply: 2 x UM-3 / AA 1.
Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads. Efficient use of radio frequency spectrum (Article 3.
© 2004 Oregon Scientific. All rights Reserved. P/N.
