User Guide

ManualsBrandsOregon ManualsProjectorRM818P

Cool RF Projection Clock

with Animated Projection

Model : RM818P

User Manual

RM818P English Cover R7 OP 7/15/04, 10:16 AM1

Summary of content (23 pages)

PAGE 1
Cool RF Projection Clock with Animated Projection Model : RM818P User Manual RM818P English Cover R7 OP 1 7/15/04, 10:16 AM
PAGE 2
The Snooze Function ............................................. 15 Introduction .............................................................. 2 The Projector Function .......................................... 16 Key Features ............................................................ 2 Activating the Projector ........................................ 16 Front View .............................................................. 3 Animation Speed Setting .....................................
PAGE 3
EN INTRODUCTION KEY FEATURES Thank you for selecting the Oregon ScientificTM RM818P Cool RF Projection Clock with Animated Projection as your product of choice. The desktop dual-band radio-controlled clock with animated time projection function features: 1. Radio-controlled clock function. 2. Time, alarm status and animation projection on your wall or ceiling. This device is designed to give you many years of reliable service, including the following conveniences: 3.
PAGE 4
EN FRONT VIEW The Cool RF Projection Clock with Animated Projection features: 1 1. Projection Unit • The projector can swivel 180 degrees back and to the front. 2. Main LCD Display 4 • Displays current time, date and RF signal reception indicator. 3. SNOOZE / LIGHT button • Press to activate projection and backlight for 5 seconds. 5 2 4. ALARM button • Press to toggle between Alarm 1, Alarm 2 and Calendar mode. 6 5. ON / OFF button • Press to activate / deactivate the alarm function. 6.
PAGE 5
EN BACK VIEW 1. Battery compartment • The unit uses 2 AAA / UM-4 1.5V batteries for power. 2. Adaptor slot 3. Reset hole • Returns all settings to default values. 5 4. [EU / UK] switch • Slide to select your nearest radio signal base i.e. England or Germany. 5. UP button 6 1 • Press and hold for 2 seconds to enable and start the RF function when in normal mode. • Press to increase the flashing item by 1 in Setting mode. 7 6.
PAGE 6
EN LCD DISPLAY SYMBOLS 1 1. Radio Reception Signal-Indicates the condition of radio reception. 2. Clock Time 6 3. Alarm 2 4. Alarm Time 5. Animation speed-Can select fast or slow. 7 6. Low Battery-Appears when power is low. 7. Time Zone indicator 3 8 4 8. Alarm-on-Appears when alarm is activated.
PAGE 7
EN • Do not scratch hard objects against the LCD display as this may cause damage. SAFETY & CARE INSTRUCTIONS SAFETY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. GETTING STARTED • LCD panel-The LCD panel is made of glass, and may break if the unit is dropped. UNPACKING THE PRODUCT • Heat sources-Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat-generating products.
PAGE 8
EN 1. Locate the battery compartment. ADAPTOR 2. Install the batteries by matching the correct polarity. Always use the correct battery type (2 x UM-4 AAA-sized 1.5V batteries). By plugging in the adaptor, the projector will project the time on the wall / ceiling continuously. WARNING Reversing the polarity may damage the product. NOTE Replace the batteries whenever the low battery icon is shown , the display is dim, or the display does not illuminate when the power is on.
PAGE 9
EN RADIO RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within range of the radio signal. NOTE When the unit is receiving the signal, the Radio Reception symbol with start to blink. Generally, complete reception takes around 2 to 10 minutes, depending on the strength of the signal. To select the most suitable radio signal for your location, slide the [EU / UK] switch to the appropriate setting.
PAGE 10
EN ENABLING / DISABLING RECEPTION CLOCK MODE To manually enable the reception of the RF signal: The Clock mode has 3 types of display: 1. Press and hold the UP button for 2 seconds until the Radio Reception symbol appears and flashes. a) HH_MM_SS / Calendar To manually disable the reception of the RF signal: 2. Press and hold the DOWN button for 2 seconds until the Radio Reception symbol disappears.
PAGE 11
EN c) HH-MM-ZONE OFFSET / Calendar HOUR-SETTING MODE 3. Press the CLOCK button once more to set the minutes. (Use the UP and DOWN buttons to adjust the minutes). NOTE Press the CLOCK button to toggle between the three modes. MINUTE-SETTING MODE CLOCK SETTING MODE To set the time: 1. Press and hold the CLOCK button for more than 2 seconds. 2. Press the CLOCK button two more times. (Use the UP and DOWN buttons to adjust the hour).
PAGE 12
3. Use the UP and DOWN buttons to select the time format (whether 12-hour to 24-hour format). To select the time zone: 4. Press the ALARM button to exit the set mode. 1. Press and hold the CLOCK button for 2 seconds. The time-zone offset hour digits will blink. Use the UP and DOWN buttons to select your time zone (e.g. +1, the time displayed will be the RF clock time plus 1 hour). TIME FORMAT SETTING MODE 2. Press the ALARM button to exit the set mode.
PAGE 13
EN DATE FORMAT SETTING MODE YEAR-SETTING MODE MONTH SETTING MODE NOTE The order of the flashing items is: time zone offset, 12 / 24hr format, hour, minute, year, DM< MD, month, day, language, exit clock setting mode. SELECTING A LANGUAGE The main unit can display the weekday in five different selectable languages: English, German, French, Italian and Spanish. To choose a language: 1. Press and hold the CLOCK button for 2 seconds. 2. Press CLOCK eight times. 3.
PAGE 14
THE ALARM FUNCTION LANGUAGE SETTING MODE NOTE Press the ALARM button or the PROJECTION ON button to exit the Clock Setting mode. Any changed item will be effective afterward. 13 RM818P English R7 OP 13 Black 9/10/04, 3:20 PM EN 4. Press the CLOCK button once more to exit the set mode.
PAGE 15
EN BASIC FUNCTIONS When the alarm sounds: • The backlight will go on for 5 seconds; • The projection will go on for 5 seconds; • And if you have a vibration device, it will vibrate for 1.5 minutes. To turn off the alarm sound: • Press any button. NOTE If you do not press any button, the alarm will automatically stop ringing after 2 minutes. NOTE The three squiggly lines indicate "on" for the optional vibrating wake up device.
PAGE 16
NOTE You will see the bell icon appear beside the date on the lower half of the LCD display. The first bell will turn on the alarm for Alarm #1. If you press the ON / OFF button a second time, you will activate the second alarm as well (as shown by the appearance of the second bell icon beside the date but below the bell icon for the first alarm). 4. Press the ALARM button when done. 5. Select the alarm types (sound only; vibration alarm only or both) by using the UP and DOWN buttons. 6.
PAGE 17
EN NOTE If the AC / DC adaptor is plugged, press the PROJECTOR ON and the projector will stay continuously on. Press the PROJECTOR ON button again to deactivate the continuous projection-on function. THE PROJECTOR FUNCTION ACTIVATING THE PROJECTOR ANIMATION SPEED SETTING To enter to the projector setting mode: 1. Press the PROJECTOR ON button for 2 seconds. 2. Use the UP and DOWN buttons to select either fast or slow animation. 3. Press the PROJECTION ON button to confirm. To turn on the projector: 1.
PAGE 18
To flip the projected time upside down: To set the animation on: 1. Press the SNOOZE / LIGHT button. 1. Press and hold the PROJECTION ON button for 2 seconds. 2. While the projector is on, press the SNOOZE / LIGHT button again to flip the time. 2. Select the animation speed by using the UP and DOWN buttons. 3. To flip again, press the SNOOZE / LIGHT button again, etc. 3. Press the PROJECTION ON button 4. Use the UP and DOWN buttons to select "on" or "off." THE VIBRATING DEVICE (OPTIONAL) 5.
PAGE 19
EN • The battery status is displayed. NOTE The vibrating device is powered by two "AA" 1.5V alkaline batteries (included). It is also compatible with rechargeable batteries (not included). • The projector is disabled. THE BACKLIGHT The user can press the SNOOZE / LIGHT button at the base of the unit to enable the backlight function and the backlight will be turned on and last for 5 seconds.
PAGE 20
Check this: Alarm is disabled. Remedy: Turn on the alarm setting. Symptom: The RF signal cannot be received. Check this: Obstacles (either electromagnetic interference or objects) are barring the signal from reaching the main unit. Problem: Operation is not normal. Remedy: Move the unit away from any sources of interference, including other electronic devices. Check this: Device requires reset. Symptom: Certain functions do not perform.
PAGE 21
EN Operation temperature: -5 °C to +50 °C • Do not, under any circumstances, touch the exposed electronic circuitry of the device as there is a danger of electric shock should it become exposed. WARNINGS • Take special care when handling a damaged LCD display, as the liquid crystals can be harmful to your health. Alarm Duration: 2 minute Power supply: 2 x UM-4 / AAA 1.
PAGE 22
EN Additional information: EC-DECLARATION OF CONFORMITY The product herewith complies with the requirements of the Low Voltage Directive 73 / 23 / EC, the EMC Directive 89 / 336 / EC and carries the CE marking accordingly. This product complies with the essential requirements of Article 3 of the R&TTE 1999 / 5 / EC Directive, if used as intended and the following standards have been applied: Safety of information technology equipment (Article 3.1.