Pedometer with PC Download Model: PE830 User Manual 1 2006.8.
EN Alarm .......................................................................... 8 Exercise Schedule Reminder .................................. 8 Connecting to your PC ............................................. 9 Backlight / Keypad Lock / Reset ............................. 9 Batteries .................................................................. 10 Precautions ............................................................. 10 Specifications ........................................................
EN OVERVIEW BACK VIEW FRONT VIEW 3 1 4 2 1. MODE/SET button 2. USB connection port 3. Base USB connector 1. Belt clip 2. USB connection port 4. 3. / button 4. Battery door / button 5. RESET / / / PE830_EU_M_EN_R1.p65 button 2 2 2006.8.
EN LCD GETTING STARTED SET UP 5 1 2 6 7 3 You must set up the device (as shown below) when you first activate the unit, reset it or change the batteries, or your pedometer will not work properly. 4 8 1. To activate the device, pull out the insulation tape underneath the battery cover. 2. Set the clock and user profile (see Clock / User Profile section). 3. Attach the pedometer to your belt or training attire at waist level. Secure it at horizontal position.
EN 1. The first setting will flash. 2. Frequent up and down movements, such as standing up and/or sitting down; running, jumping, or ascending/descending stairs or steep slopes. USEFUL TIPS When changing settings you can: • • to change a value and SET to confirm 2. Press / and move on to the next setting. 3. The setting sequence is: to speed through the setting Press and hold / options. Press SET to bypass or confirm a setting and move on to the next one.
EN length, walk 10 paces and divide the distance traveled by 10. • • • • Timer 7-day Memory User Profile Clock The modes are described in the sections that follow. DAILY To view the step, distance and calorie display: 1. Press MODE to navigate to Daily Mode. CHANGE INDIVIDUAL CLOCK OR USER PROFILE SETTINGS If after the initial setting of the clock / user profile (as detailed in previous section), you wish to change the clock time or edit one of the user profile settings, simply: 2. Press 1.
EN CALORIE been set, start walking to activate the pedometer. The GO! screen will appear to confirm that the unit is starting to monitor your progress. 2. While you are walking, the ESTIMATED FINISH TIME (EFT) will periodically appear to advise you how long it will take to complete your target, based on your current pace. The target bar at the bottom of the display will move from left to right (start to finish) to show your progress. TARGET To set step, distance or calorie target: 1.
EN To set timer: VIEW TOTAL WEEKLY RECORDS 1. Press MODE to navigate to Timer Mode. 1. Press MODE to navigate to Memory Mode. 2. Press and hold SET for 2 seconds to enter setting mode. to select countdown or count-up timer 3. Press / and press SET. If the countdown timer is selected you will need to set the hr:min:sec by pressing / to change a value and SET to confirm. 2. Press to toggle between the total weekly step, distance and calorie display. VIEW DAILY RECORDS 1.
EN 3. Press and hold SET to enter the setting mode. 4. Press / to change a value and SET to confirm and move on to the next setting. 5. The setting sequence is: • Hour • Minute • On / Off 4. Press to toggle between your chosen day’s step, distance and calorie display. IMPORTANT At midnight all accumulated daily data will be stored for a period of 7 days. Therefore, once a memory has been stored for 7 days it is replaced with new data from the 1st day of the new week.
EN 3. Press again to view the activity goal value. If no key is pressed when the alarm sounds, a back-up beep will sound again after 5 minutes. CONNECTING TO YOUR PC Data can be transferred to a PC directly from the pedometer or by using the base. To connect the pedometer to a PC: 1. Insert the USB cable into your PC. 2. Unclip the cover of the USB port on the pedometer. 3. To connect directly to the pedometer: insert the USB cable into the port on the pedometer. 4.
EN To turn the keypad lock ON / OFF, press and hold . • To reset the unit, remove and then re-insert the battery. BATTERIES • appears when the battery is low and needs replacing. • Protect the environment by taking exhausted batteries to authorized disposal stations. • • • • • 1. Unscrew to open back cover. 2. Insert 1 CR2032 battery. 3. Place the cover back and tighten the screw.
EN SPECIFICATIONS ABOUT OREGON SCIENTIFIC TYPE DESCRIPTION Pedometer LxWxH 36 x 53 x 50 mm (1.4 x 2.1 x 2.0 in) Base LxWxH 67 x 65 x 36 mm (2.7 x 2.6 x 1.4 in) Pedometer weight 37 g (1.3 oz) Base weight 26 g (0.9 oz) Step counter 0 to 99,999 steps Distance travelled 0 to 999.99 (in km or miles) Visit our website (www.oregonscientific.
EN EU-DECLARATION OF CONFORMITY Hereby, Oregon Scientific, declares that this SmartSync Pedometer with PC Download (PE830) is in compliance with EMC directive 89/336/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. 12 PE830_EU_M_EN_R1.p65 12 2006.8.
