Product Manual

Operating Instructions

Towing

CAUTION: See safety information related to

towing safety on page 6 of this manual.

This log splitter is equipped with pneumatic tires, a class

1 coupler (2 in. diameter ball required) and safety chains.

Before towing, the safety chains must be secured to the

hitch or bumper of the vehicle. Local regulations should

be checked regarding licensing, lights, towing, etc. Turn

fuel shut off valve on the engine to the “OFF” position

prior to towing. Failure to do so may result in flooding

the engine. Do not exceed 45 mph when towing this log

splitter. See also Towing Safety on page 6 of this manual.

Maintenance

CAUTION: See safety information related to general

repair on page 9 and hydraulic safety on page 10.

1. Consult the operating and maintenance instructions

of the engine manufacturer for engine care and

maintenance.

2. Always check the oil level of the hydraulic reservoir

before operation. Operating the log splitter without an

adequate oil supply will cause severe damage to the

pump.

3. Change the hydraulic oil filter after the first 25 hours

of operation. Thereafter, change the oil filter every 100

hours or seasonally, whichever comes first. The fIlter kit

part number is 622528.

4. To drain the hydraulic oil, remove the drain screw on the

bottom of the tank.

5. If the wedge becomes dull or nicked, it can be removed

and sharpened.

6. Clean the breather cap after 25 hours of operation. Clean

it more often when operated in dusty conditions.

7. See also General Repair and Hydraulic Safety on page 9

of this manual.

8. All replacement parts must meet manufacturer’s

specifications.