Product Manual

Assembly Instructions

Step 2:

2a: Locate the tongue assembly and rotate the jack into the down position.

2b: Remove the hold down bolt that secures the tank to the base of the pallet.

2c: Position the tongue so that the mounting holes align with the holes in the tanks tongue mount.

2d: Insert the two M12 x 110mm bolts with a flat washer under the head of the bolt.

2e: Install a flat washer, lock washer, nut on each bolt and tighten.

32 4 5 6

Item Description Quantity

1 Tongue Assembly 1

2 Tank Assembly 1

3 M12 x 110 Bolt 2

4 Flat Washer 4

5 Lock Washer 2

6 M12 Nut 2

7 Ground Stand / Jack Stand 1