Product Manual

Assembly Instructions

This log splitter is partially assembled at the factory. Please refer to the drawings and parts list should it become necessary

to disassemble the unit for repair or replacement of parts. The drawings in this manual are for reference only. Some of the

components on your log splitter may look slightly different.

CAUTION: To avoid personal injury, always get help when moving or

assembling heavier components such as a beam.

Tools Required

1/4" wide flat head

screwdriver

Hammer

10 mm wrench

13 mm wrench

18mm wrench

19mm wrench

10 mm Hex wrench (included)

Needle-nose pliers

Box cutter

Step 1:

1a: Remove the top and sides by bending open all the metal side locks. Use caution as shifting may have occurred.

1b: Remove loose items from the crate and set aside.

1c: Cut all hold down straps and inspect each part for damage.

1d: Take note that the following items are included in the crate:

Description Quantity Description Quantity

Beam Assembly 1 Wheel Assemblies 2

Tank Assembly 1 Log Catcher 1

Motor/Pump Assembly 1 Hardware Kit 1

Pressure Hoses 2 Manual Canister 1

Note: If any part is damaged, contact your dealer or delivering carrier.

1 2

3 4