GB BMI BODY WEIGHT MONITOR MODEL : BWR102 USER’S MANUAL ADJUST THE SETTING OF THE REMOTE DISPLAY UNIT 1. enter the setting mode. 2. set the display format. set 1 2 3. set the hour. 1 2 4. set the minute. set 1 2 8. set the date. set 1 2 7. set the month. set 1 2 6. set the date-month format. set 1 2 5. set the year.
GB 9. set the format of the measurement unit. 1 2 set ACQUIRE WEIGHT FROM SCALE 1. select the display unit on scale. RESET lb 2. step on the scale. 3. stand still till reading come out. Note: Beep sound to indicate 10 end of measurement. 4. step off the scale. Note: Repeat step 2 - 3 for next measurement.
GB STORE WEIGHT TO REMOTE DISPLAY UNIT 1. take measurement from scale. 2. activate receiving mode. Note: Beep sound to indicate the activation of receiving mode. Receiving function will be activated for 30 sec. 1 30 3. weight received from scale. Note: Beep sound to indicate signal is being received from the scale. 2 If the height is not set, there will not have BMI displayed. 4. select the user. 1 1 2 5. store the weight. Note: Beep sound to indicate the 1 7 weight is stored to memory.
GB USER SETTING / MEMORY RECALL FROM THE REMOTE DISPLAY UNIT 1a. select the user. 1 1 2 Note: If the height is not set, there will not have height displayed. 1b. quit user mode. 2a. recall memory. 1 1 mem 2 3 mem 2 2b. set the heigt.
GB TIPS A. install the batteries to the unit. B. when battery is first installed on both scale and remote display unit. B-1. acquire weight on scale. B-2. match the remote display unit with the scale. Note: a) beep sound to indicate the matching is activated. b) check the reading on scale and remote display unit . c) if fail, repeat step B-1 & B-2. B-3. set the clock. C. after changing batteries of the scale, repeat step B-1 & B-2. D.
GB WHAT IS BODY MASS INDEX (BMI) ? Body Mass index (BMI) is a measurement of your body height to weight ratio. BMI is the most widely used an international standard for evaluating obesity. It is expressed as your body weight in kilograms divided by the square of your body height in meters. BMI = body weight (kg) [body height (m)]2 It can be used as indication to estimate whether you are overweight or underweight.
GB TROUBLE SHOOTING Symptom 1. 2. Description Action incorrect use or weight step off the scale first and measured is not stable. repeat the measurement. scale overloaded. be sure no excessive mass is put on scale and then repeat the measurement. 3. no data of height is input for check the height and repeat the BMI or BMI is out of range. measurement NOTES FOR THE USER MAX 150kg 100g A. maximum capacity: 150 kg / 330 lb / 23st8lb B. graduation: 0.1 kg / 0.2 lb C. height input range : 94.
GB I. do not load the scale when not in use J. avoid from wet CL EA NE RR K. avoid from abrasive or corrosive cleaning agent EC-DECLARATION OF CONFORMITY This product contains the approved transmitter module TX 01 and complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if used for its intended use and that the following standard(s) has/have been applied: Efficient use of radio frequency spectrum (Article 3.
GB GB Legend: Key```` - Press key - Press and hold - Flashing F Légende: Key - Key Appuyer key - Key Appuyer et maintenir appuyer - Clignotant D Legende: Key - Betätigen key - Gedrückt halten - Blinkt I Legenda: Key - Premere il tasto key - Premere il tasto e tenerlo premuto - Flashing lampeggiante ES Leyenda: Key - Pulsar key - Pulsar y mantener oprimido - Parpadeando P Legenda: Key - Pressione key - Pressione e segure - Intermitente 9
GB NOTE FOR THE USER · · Please read the manual carefully before use. The scale will calibrate automatically to provide accurate measurement when the scale is placed on the ground. Message: , will be displayed on the scale to indicate the calibration is in process. Normally it will take 2-3 seconds only. Please leave the scale alone when you see such message.
GB 11
