User's Manual

A. Setup
B. Skin Treatment
Press the key to start the skin treatment.
A LED above the key will light up.
Each treatment lasts for 5 minutes.
Press the key again to increase the mist
volume. Two LEDs above the key will light up.
Press the key during operation to switch the
device to standby mode. Otherwise the device will
switch to standby mode after 5 mins the session is
finished.
Close the eyes when the mist is directly sprayed on you face
To direct the mist to a specific area, attach the
extension hose and the nozzle during use. Hold the
nozzle approximately 15-20cm from the target area.
The extension hose has limited length. Don’t pull the
extension hose if the treatment area is too far away.
Bring the device closer if necessary.
The appropriate distance between the mist
outlet and the face should be from 20-25cm.
Press to turn on the device.
Operation
Place the device on a sturdy, level and dry surface.
Connect the power adapter to the device. Plug the
power adapter to a main outlet.
1.
1.
2.
2.
3.
3.
4.
5.
12
BL101femUMb.indd 12 29/11/2011 19:05:23