Product Manual
22
TROUBLESHOOTING
OREGON® Cordless Tool System
BLOWER MODEL BL300
AA 1214 - F/N 571702
SYMPTOM POSSIBLE CAUSE RECOMMENDED ACTIONS
Low use time per
battery charge
Excessive use of turbo
mode
Use turbo only when needed to move dense,
heavy or wet material.
Battery pack not fully
charged
Recharge. See “Battery Pack and Charger”.
Battery pack is at the
end of its life
All batteries have a finite life. If the battery pack
is more than two years old or has been recharged
frequently, it may be time to replace it. Replace
only with the battery pack specified for this blower.
Blinking orange
light on charge
state indicator
Charger short circuit,
charger over current,
over voltage limit, open
circuit on battery pack
or charge/pre-charge
time out error
1. Make sure the charger cord is connected to both
the charger and the electrical outlet.
2. Make sure the charger is receiving the correct
voltage.
3. Try charging another battery pack designed for
this charger.
If this does not correct the problem, have the
function checked at an approved service location.










