Product Manual
27
OREGON® PowerNow™
CHAINSAW MODEL CS250
AF 0911 - F/N 547361
MAINTENANCE AND CLEANING
REPLACING THE
SHARPENING STONE
CAUTION: REPLACE
POWERSHARP® SAW CHAIN AND
THE SHARPENING STONE AT THE
SAME TIME. FAILURE TO DO SO
COULD RESULT IN DECREASED
PERFORMANCE OR DAMAGE TO
THE CHAIN AND/OR SHARPENING
STONE.
IMPORTANT: THE POWERSHARP®
INTEGRATED SHARPENING
SYSTEM IS FOR USE ONLY WITH
POWERSHARP® CHAIN.
Withthechainsawoandcoolandthe
batterypackremoved,removetheside
coverbyremovingthesidecoverknob.
Installthenewsharpeningstoneas
follows:
•Removethetwoscrewsholdingthe
sharpeningstone.Removethestone
(Fig.29).
•MakesurethePowerSharp®leverand
surroundingareaarefreeofdebris.
•Placethenewstoneinplace.Replace
thescrewsandtightensnugly.
•Reinstallsidecoverandtightentheside
coverknob.
Fig. 29
BATTERY PACK MAINTENANCE
WARNING: THERE ARE NO
USER SERVICEABLE PARTS INSIDE
THE BATTERY PACK. DO NOT
DISASSEMBLE.
Lithiumionbatterieshavea
predeterminedoperatinglife.Ifthe
operatingtimeshortensexcessively,this
meansthebatteryisattheendofits
usefullife.Replacethebatterypack.
CLEANING
CAUTION: WHEN CLEANING
THE CHAINSAW POWER HEAD, DO
NOT IMMERSE IN WATER OR OTHER
LIQUIDS.
SAW
•Removebatterypackbeforecleaning.
•Removewoodchipsandotherdebris
fromthebatteryport.Makesurethe
contactsarecleananddry.
•Afteruse,cleandebrisfromthechain
andguidebar.Wipepowerheadwitha
cleanclothmoistenedwithamildsoap
solution.Neveruseharshcleanersor
solvents.
•Alwayscleanoutwoodchips,sawdust,
anddirtfromthebargroovewhen
replacingthesawchain.
BATTERY PACK
Ifthebatterypackterminalsaredirty,
cleanthemwithasoft,dryclothpriorto
use.Dirtoroilonthecontactscancause
apoorconnection,resultinginlossof
powerorinabilitytofunction.
CHARGER
Aswiththebatterypack,dirtyterminals
cancauseapoorconnection.Be
surethechargerisunplugged.Clean
terminalswithadry,cleancloth.










