Product Manual

18
AF 0911 - F/N 547361
OREGON® PowerNow™
CHAINSAW MODEL CS250
OPERATING THE SAW
CHARGING THE BATTERY PACK
WARNING: FAILURE TO FOLLOW
PROPER CHARGING PROCEDURES
MAY CAUSE EXCESSIVE VOLTAGE,
EXCESSIVE CURRENT FLOW, LOSS
OF CONTROL DURING CHARGING,
LEAKAGE OF HAZARDOUS
CHEMICALS, HEAT GENERATION,
BURSTING, OR FIRE.
Withthechargercordconnectedtothe
chargerandpluggedintoanelectrical
outlet,alignthegroovesinthebattery
withtherailsonthechargerandslide
thebatterypackontothechargeruntil
fullyseated(Fig.9).
Fig. 9
Checkthecharge-stateindicatorfor
chargingconditions.
Thebatterypackshouldbeready
foruseinapproximatelyonehour
forS-seriesbatterypacksandin
approximatelytwohoursformodel
E-seriesbatterypacks.
INSERTING AND RELEASING
THE BATTERY PACK
Alignthegrooveinthebatterywiththe
railsinsidethebatteryport.Firmlyinsert
thebatterypackintothechainsaw’s
batteryport,pressingforwarduntilyou
hearaclickasitlocksintoplace(Fig.10).
Fig. 10
Toremovethebatterypack,liftupon
thebatteryreleaseandremovethepack
(Fig.11).
Fig. 11