S I M P L Y A M A Z I N G ® USER’S GUIDE CARPET & HARD FLOOR CLEANER XLS700 series •IMPORTANT• SAVE THIS BOOKLET! Includes: • Warranty • Safety Warnings • Parts List • Operating Instructions • Accessories List • Trouble Diagnosis
IMPORTANT SAFETY INSTRUCTIONS BEFORE OPERATING CLEANER, READ ALL INSTRUCTIONS IN THIS MANUAL CAREFULLY. When using an electrical appliance, basic precautions should always be followed, including the following: Table of Contents READ ALL INSTRUCTIONS BEFORE USING THIS STEEMER CLEANER Maintenance and Customer Service, Polarized Plug Notice, Accessories, Important Safety Instructions . . . . . . . . . . . . . . page 1 Warranty, Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . .
Warranty Troubleshooting Guide WARNING: Unplug cord from electrical outlet before servicing. ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for residential use, not resale from Oreck or an Oreck Authorized Retail Dealer.
1 c 2 3 L a R b b a a 4 5 6 a RESET L 7 TEST R 8 9 a b c 10 11 12 b a 13 14 15 16 17 18 3
19 20 21 c c a b d b a 22 Features 8. 25’ Power Cord 9. A.L.C.I. – Safety Plug with Reset and Test Buttons 10. Translucent Upper Supply Tank 11. Translucent Lower Recovery Tank 12. Transparent Nozzle Cover a 13. Motorized Scrubbing Brush 14. Convenient quick-release Cord Wrap Parts Checklist 15. Wiper for hard floor cleaning 16. Temperature Indicating Label 17. Floor Stand Read all instructions thoroughly before assembly/use. Please unpack carton, removing all parts and packages.
Insert Cleaning Cartridge/Bottle: Servicing of Double-Insulated Appliances NOTE: Cleaner will not operate without a cleaner cartridge locked into the docking bay. A double-insulated appliance is marked with one or more of the following: The words “Double Insulation” or “Double Insulated” or the double-insulation symbol ( ). In a double-insulated appliance, two systems of insulation are provided instead of grounding.
fig. 14 To rinse carpet or hard flooring, press the red button in the handle. Slowly pull the cleaner backwards over already cleaned area. Pressing the button releases clean water. As you pull the nozzle over the sprayed floor, the nozzle extracts any remaining solution from the floor and stores the dirty water in the recovery tank. fig. 17 Lower cleaner onto floor stand. fig. 7/8 Remove the supply/recovery tank from the cleaner. fig. 9 Open tank cap. Fill with hot tap water, close tank cap. fig.
c. Remove and replace the old belt if broken or if excessive wear is noted. To Clean Carpet Cleaner To Install a New Belt: WARNING: To reduce the risk of electric shock or injury from moving parts, unplug before servicing. d. Remove brush roll and insert the new belt into the rectangular cavity. Using a long screwdriver, loop belt around motor shaft. Pull and stretch belt over crowned end of the brush roll. Rotate brush to properly align belt.
