40337-02 REV A S I M P L Y A M A Z I N G® USER’S GUIDE PROFESSIONAL GRADE COMMERCIAL UPRO14T •IMPORTANT• SAVE THIS BOOKLET! Includes: • Safety Warnings • Warranty • Operating Instructions • Trouble Diagnosis USA & Canada: 1-800-989-4244 www.oreck.
Table of Contents Maintenance and Customer Service, Grounding Instructions, Important Safety Instructions . page IMPORTANT SAFETY INSTRUCTIONS 2 Warranty, Troubleshooting Guide . . . . . . . . . . . . . . . . . page 3 Parts List, Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Installing Power Cord, Operating Instructions . . . . . . . page 5 General Information, To Clean or Replace Inlet Filter, To Replace Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Troubleshooting Guide ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for commercial use, not resale from Oreck or an Oreck Authorized Retail Dealer.) WARNING: Unplug cord from electrical outlet before servicing. PROBLEM Oreck will repair or replace, free of charge, to the original purchaser, any part that is found to be defective in material or workmanship within one (1) year.
Parts List 3 To assist you in identifying components of your vacuum, the parts have been numbered as follows: 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Handle Option Mount Full Bag Light Main Power Switch Door Latch Bag Housing Release Handle Electronic Display Handle Pivot Brush Housing Power Brush Housing 12. Hose 13. Upper Cord Hook 12 4 13 2 14 5 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
4. Attach desired cleaning tool (dusting brush, upholstery brush or crevice tool). 5. When finished cleaning, replace the tool and wand to their storage positions. Make sure the wand fits tightly into the base inlet so it will not leak. 3 2 Cord Strain Relief Clamp 7 Dust Bag Full Indicator Cord Strain Relief 1. Your machine has a red bag full indicator light located on top of the unit next to the power switch which will come on when the airflow is obstructed indicating the dust bag is full. 2.
General Information To Clean or Replace Inlet Filter WARNING: Unplug cord from electrical outlet before servicing. The performance of your new vacuum cleaner greatly depends upon care and maintenance. The instructions in this manual will guide you in performing basic care and maintenance. To obtain the most satisfying years of service read the instructions and keep them handy for future reference. 1. Remove the dust bag. 2. Snap the filter retainer from its fitting (fig 10). 3.
©2006 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and registered trademarks are owned and used under the authority of Oreck Holdings, LLC.
