Steam-All Canister TM User’s Guide STEAM200 ® ® Important! Read this manual carefully, and keep for future reference.
Enjoy Thank You for purchasing our top-of-the-line Oreck Steam-All™ Canister Steam Cleaner. This powerful, environmentally friendly cleaner will help you clean both hard floors and refresh carpets. At Oreck, we understand that our customers are unique and expect superior service. To meet your needs, we offer different customer service options to accommodate your lifestyle and preference. Welcome to our Call. Click. Visit. customer service program.
Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Warnings . . . . . . . . . . . . . . . . . . . . . . . . 4 Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Product Components . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Attach the Hose/Handle . . . . . . . . . . . . . . . . 9 Attach the Floor Nozzle . .
Safety General Warnings ! IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using the steam cleaner. WARNING! To reduce the risk of fire, electric shock, or injury when using an electrical appliance, basic precautions should always be followed, including the following: • Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing. • To prevent shock, do not use outdoors. The steam cleaner is intended for household use only.
• Do not handle the plug or appliance with wet hands. • Do not over fill the boiler tank. Do not exceed the maximum fill level. Use the measuring jug to measure the correct amount of water. • Do not use without the filler cap in place. Check that the filler cap is completely screwed down before use. • Do not operate without water in the boiler tank. • Do not fill the water tank with anything other than water or Oreck Fresh Air® Steam Mop Essence.
! DANGER Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is grounded. If not, have a proper outlet installed by a qualified electrician. This appliance is for use on nominal 120-volt circuit. It has a grounding plug similar to the example shown. Make sure the appliance is connected to an outlet with the same configuration as the plug.
Parts Product Components 1 2 3 16 8 17 1. Steam-All™ Steamer 9 2. Shoulder strap 13 3. Handle/hose 4. Extension tube (3) 5. Floor nozzle adaptor 4 6. Floor nozzle 7. Cotton floor towel 10 8. Jet nozzle adaptor 14 9. Jet nozzle 10. Large brush 5 11. Small brush 11 15 12. Angled nozzle 13. Upholstery nozzle 14. Cotton Bonnet for upholstery nozzle 6 15. Window squeegee 12 7 16. Funnel 17.
Features 1 4 2 3 5 6 7 8 9 1. Filler Cap and Boiler Tank The filler cap prevents steam from escaping from the boiler tank. The boiler tank holds the water/steam. 2. ON/OFF Button Turns the steamer on and off. 3. Carrying Handle Used to carry the steamer and hold during use. 4. Hose handle button Used to control the direction of the steam and connect the attachments to the steamer. 5. Safety lock button Used to lock the trigger and prevent accidental release of steam. 10 6.
Assembly ! WARNING! To reduce the risk of personal injury, unplug the power cord from the electrical outlet and let the unit/accessories cool down completely before handling. Attach the Hose/Handle 1. Pull the hose inlet flap down. 2. Line up the keyway on the hose/handle with the socket of the Steam-All™ Steamer. Tip! 3. Push the keyway into the socket. See page 12 to determine the correct attachments for your cleaning job. Plug Keyway on hose/handle Hose inlet flap Attach the Floor Nozzle 1.
Attaching the Jet Adaptor to Nozzles Note: The jet adaptor is used when attaching the upholstery nozzle and jet nozzle. 1. Align the keyway on the jet nozzle adaptor so it is lined up with the key in the nozzle. 2. Insert the jet adaptor into the nozzle of choice and rotate so the two are locked together. 3. Insert the assembly into the hose/handle, or extension tube until they are locked together. You will hear a click and the yellow interlock should be in the hole on the attachment.
To attach the cotton floor towel to the floor nozzle: 1. Lift the clip on the top of the floor nozzle. Floor nozzle clip 2. Place the cotton towel under clip and release. 3. Repeat steps one and two for the opposite clip on the floor nozzle. To attach the shoulder strap: If you would like to use the shoulder strap: 1. Attach the hooks on the strap to the plastic rings on the Steam-All™. 2. Adjust for comfort by sliding the strap length adjuster.
Use Choose the Attachments To determine the right tool the for the job, you must first choose the correct adaptor, nozzle and accessory. Adaptors Extension Tube: Use for additional reach. There are three extension tubes to extend your reach an additional forty inches. Floor Nozzle Adaptor: Attaches to the Floor Nozzle. Jet Nozzle Adaptor: Attaches to the Jet Nozzle and Upholstery Nozzle. Nozzles and Their Accessories Floor Nozzle The floor nozzle is used for cleaning large floor areas.
Before You Begin Cleaning ! WARNING! To reduce the risk of personal injury, unplug the power cord from the electrical outlet and let the unit/ accessories cool down completely before handling. Steam may cause serious injury if in contact with body parts. Always allow the steamer to cool down before handling. Do not fill the water tank with any thing other than water or Oreck Fresh Air® Steam Mop Essence.
Refilling the Boiler Tank ! WARNING! To reduce the risk of personal injury, unplug the power cord from the electrical outlet and let the unit/accessories cool down completely before handling. Steam may cause serious injury if in contact with body parts. Always release all steam pressure before removing the filler cap. Safety lock 1. Press the steam trigger and release all the steam pressure. 2. Allow the steamer and assembly to cool down. 3. Refill the boiler tank (see Filling the Boiler Tank on page 13).
Turn the Steamer ON ! WARNING! Steam may cause serious injury if in contact with body parts. Ensure the filler cap is seated properly and tight, and the safety lock button on the hose handle is engaged before turning the steamer ON. Always direct the trigger away from the user and away from any bystanders. Important! The red indicator on the filler cap is a safety device. It will push out when there is steam pressure in the boiler and go back in when it is safe to refill the boiler tank.
Apply Steam ! WARNING! To reduce the risk of personal injury, unplug the power cord from the electrical outlet and let the unit/accessories cool down completely before handling. Hot water may be ejected at start-up and possibly cause serious injury if in contact with body parts. Always direct the steam into a cloth, bucket or sink until the steam is emitted evenly. The steam may cause serious injury if in contact with body parts. Never point the steamer at people or pets when in use.
Cleaning Glass Surfaces ! WARNING! Sudden application of excessive heat may shatter glass and cause serious injury. Always warm glass surfaces gradually when applying steam to the glass. 1. Warm the glass by applying the steam evenly to the glass from a distance of eight to ten inches. 2. Apply steam to clean the glass at a distance of four to six inches. 3. Switch the steam OFF and wipe the moisture off the glass (top to bottom) with the window squeegee. 4. Wipe the squeegee and lower edge of the glass.
After Using the Steamer 1. Switch the steamer OFF, unplug the power cord and allow the steamer to cool off. 2. Press the steam trigger and release any steam pressure. 3. Engage the steam safety lock button. 4. Remove the filler cap. 5. Empty the boiler tank and allow the tank to dry before placing the cap back on. 6. Press the hose release button and release the hose. 7. Wrap the cord around the cord storage foot and storage release lever. For quick release of the cord rotate the storage release lever.
Maintenance Rinsing the Boiler Tank ! WARNING! To reduce the risk of personal injury, unplug the power cord from the electrical outlet and let the unit/accessories cool down completely before handling. 1. Fill the boiler tank with water. 2. Place the filler cap on and shake vigorously to release lime scale deposits on the bottom of the boiler tank. 3. Over a sink, remove the filler cap and pour the water out.
Troubleshooting Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck authorized service center. Problem Check • Unit fails to steam • Not plugged in properly.
Replacement Parts All accessories and replacement parts are sold separately. To order, call our customer service group or visit our website. Please have your model number from the data label on the bottom of the unit.
Warranty ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for residential use, not resale, from Oreck or an Oreck Authorized Retail Dealer.) Steam-All Canister Oreck will repair or replace, free of charge, to the original purchaser, any part that is found to be defective in material or workmanship within one (1) year of the date of purchase. This limited warranty applies to normal domestic use.
© 2010 Oreck Holdings, LLC. All rights reserved.
