Use and Care Manual

BEFORE YOU BEGIN CLEANING

1. Vacuum carpet and upholstery thoroughly

with an Oreck

vacuum.

2. Use your Oreck

carpet cleaner only if

upholstery fabric is marked with a “W”

(for “wet” clean) or “S/W” (for “solvent/

dry” or “wet” clean). Don’t clean fabric

marked “S” (“solvent/dry” clean only).

3. Test for colorfastness in a small, hidden area.

Gently rub surface with a dampened white

cloth. Wait ten minutes and check for color

removal or bleed with a white paper towel.

4. Move furniture out of area to be cleaned.

Place aluminum foil or wax paper under legs

of furniture too heavy to move to prevent

wood nishes from staining carpet.

NOTE: To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray.

NOTE: To avoid damage to wood ﬂoors underneath area rugs or carpet, place waterproof material (e.g. plastic)

underneath them before cleaning.