User Guide

Chapter 2 Simulation examples
34
Figure 15 Stimulus Editor window.
7 Click OK.
8 From the File menu, choose Save to save the stimulus
information. Click Yes to update the schematic.
9 From the File menu, choose Exit to exit the Stimulus
Editor.
To set up and run the transient analysis
1 From Capture’s PSpice menu, choose
New Simulation Profile.
The New Simulation dialog box appears.
2 In the Name text box, type
Transient.
3 From the Inherit From list, select
Schematic1-DC Sweep, then click Create.
The Simulation Settings dialog box appears.
4 Click the Analysis tab.
5 From the Analysis list, select Time Domain (Transient)
and enter the settings shown in Figure 16.
TSTOP = 2ms
Start saving data after = 20ns
press V+@
Figure 16 Transient analysis simulation
settings.
Pspug.book Page 34 Wednesday, November 11, 1998 1:14 PM