User Guide

Chapter 2 Simulation examples
28
Displaying DC analysis results
Probe windows can appear during or after the simulation
is finished.
To plot voltages at nets In and Mid
1 From PSpice’s Trace menu, choose Add Trace.
2 In the Add Traces dialog box, select V(In) and V(Mid).
3 Click OK.
To display a trace using a marker
1 From Capture’s PSpice menu, point to Markers and
choose Voltage Level.
2 Click to place a marker on net Out, as shown in
Figure 8.
Figure 7 Probe window.
press
I
press C+M
Pspug.book Page 28 Wednesday, November 11, 1998 1:14 PM