User Guide

Chapter 2 Simulation examples
22
Running PSpice
When you perform a simulation, PSpice generates an
output file (*.OUT).
While PSpice is running, the progress of the simulation
appears and is updated in the PSpice simulation output
window (see Figure 4).
Figure 4 PSpice simulation output window.
Performing a bias point analysis
To set up a bias point analysis in Capture
1 In Capture, switch to CLIPPER.OPJ in the schematic
page editor.
2 From the PSpice menu, choose New Simulation
Profile to display the New Simulation dialog box.
3 In the Name text box, type
Bias.
4 From the Inherit From list, select None, then click
Create.
The Simulation Settings dialog box appears.
5 From the Analysis type list, select Bias Point.
6 Click OK to close the Simulation Settings dialog box.
You can set up a simu
l
ation pro
f
i
l
e to run
one analysis at a time. To run multiple
analyses (for example, both DC sweep and
transient analyses), set up a batch
simulation. For more information, see
Chapter 7,
Setting up analyses
and starting simulation.
T
h
e root sc
h
ematic
l
iste
d
is t
h
e sc
h
ematic
page associated with the simulation profile
you are creating.
Pspug.book Page 22 Wednesday, November 11, 1998 1:14 PM