User Guide

Writing additional results to the PSpice output file
371
3 Click the property name for the analysis type that you
want tabulated: DC, AC, or TRAN.
4 In the columns for the analysis type that you want
plotted (DC, AC or TRAN), type any non-blank value
such as
Y, YES or 1.
5 If you selected the AC analysis type, enable an output
format.
a Click the property name for one of the following
output formats: MAG (magnitude), PHASE,
REAL, IMAG (imaginary), or DB.
b Type any non-blank value such as Y, YES or 1.
c Repeat the previous steps (a
) and (b) for as many
AC output formats as you want to see tabulated.
6 Repeat steps 2
through 5 for any additional analysis
types you want plotted.
Note
If you do not enable an analysis type, PSpice reports the transient
results.
I
f
you
d
o not ena
bl
e a
f
ormat, PSpice
defaults to MAG.
Pspug.book Page 371 Wednesday, November 11, 1998 1:14 PM