User Guide

Trace expressions
357
trace expression;display name
4 Click OK.
Basic output variable form
This form is representative of those used for specifying
some PSpice analyses.
<output>[AC suffix](<name>[,name])
Table 4
This placeholder... Means this...
<
output
> type of output quantity: V for voltage
or I for current
[
AC suffix
]
*
quantity to be reported for an AC
analysis. For a list of valid AC suffixes,
see
Table 8 on page 13-361
<
name
>[,
name
] specifies either the
net
or (+
net
,-
net
)
pair for which the voltage is to be
reported, or the
device
for which a
current is reported, where:
•
net specifies either the net or pin
id (<fully qualified device
name>:<pin name>)
• device name
specifies the fully
qualified device name; for a list of
device types, see
Table 9 on
page 13-361
and
Table 10 on
page 13-362
A fully qualified device name consists of the
full hierarchical path followed by the
device’s reference designator. For
information about syntax, see the voltage
output variable naming rules.
Pspug.book Page 357 Wednesday, November 11, 1998 1:14 PM