User Guide

Chapter 13 Analyzing waveforms
326
Configuring trace color schemes
In the Probe Options dialog box, you can set options for
how the available colors and the color order specified in
the PSPICE.INI file are used to display the traces in a
Probe window. You can use:
• a different color for each trace
• the same color for all the traces that belong to the same
y-axis
• the available colors in sequence for each y-axis
• the same color for all the traces that belong to the same
waveform data file
To configure trace color schemes in the Probe Options dialog box
1 From the Tools menu, choose Options to display the
Probe Options dialog box.
2 Under Trace Color Scheme, choose one of the
following options:
3 Click OK.
Table 2
Choose this option... To do this...
Normal Use a different color for each trace (for
up to 12 traces, depending on the
number of colors set in the PSPICE.INI
file).
Match Axis Use the same color for all the traces
that belong to the same y-axis. The title
of the axis (by default, 1, 2, etc.) is the
same color as its traces.
Sequential Per Axis Use the available colors in sequence for
each y-axis.
Unique by File Use the same color for all the traces in
one Probe window that belong to the
same waveform data file.
For in
f
ormation on w
h
at t
h
e
d
e
f
au
l
t
available colors and color order are and
how to change them, see Editing
display and print colors in the
PSPICE.INI file on page 13-324.
PSpice saves t
h
e se
l
ecte
d
co
l
or sc
h
eme
f
or
future waveform analyses.
Pspug.book Page 326 Wednesday, November 11, 1998 1:14 PM