User Guide

Monte Carlo analysis
291
Reading the summary report
The summary report generated in this example (see
Figure 76) specifies that the waveform generated from
V(OUT1, OUT2) should be the subject of the collating
function YMAX. In each of the last four runs, the new
V(OUT1, OUT2) waveform is compared to the nominal
V(OUT1, OUT2) waveform for the first run, calculating
the maximum deviation in the Y direction (YMAX
collating function). The deviations are printed in order of
size along with their run number .
With the List option enabled, a report is also generated
showing the parameter value used for each device in each
run. In this case (see Figure 77), run three shows the
highest deviation.
Figure 76 Summary of Monte Carlo runs for EXAMPLE.OPJ.
Pspug.book Page 291 Wednesday, November 11, 1998 1:14 PM