User Guide

Temperature analysis
281
Temperature analysis
Minimum requirements to run a temperature
analysis
Minimum circuit design requirements
None.
Minimum program setup requirements
1 In the Simulation Settings dialog box, from the
Analysis type list box, select Time Domain (Transient).
2 Under Options, select Temperature Sweep if it is not
already enabled.
3 Specify the required parameters for the sweep.
4 Click OK to save the simulation profile.
5 From the PSpice menu, choose Run to start the
simulation.
See Setting up analyses
on
page 7-197
for a description of the
Simulation Settings dialog box.
Pspug.book Page 281 Wednesday, November 11, 1998 1:14 PM