User Guide

Chapter 10 Transient analysis
262
4 In the schematic page editor, configure the Stimulus
Editor’s output file into your schematic:
a From the Pspice menu, choose Edit Simulation
Settings.
a In the Simulation Settings dialog box, select the
Include Files tab.
b Enter the file name specified in step 2.
c If the stimulus specifications are for local use in the
current design, click the Add to design button. For
global use by any design, use Add as global
instead.
d Click OK.
5 Modify either the stimulus instances in the schematic
or symbols in the symbol library to reference the new
stimulus specification.
6 Associate the transient stimulus specification to a
stimulus instance:
a Place a stimulus part in your schematic from the
part set: VSTIM, ISTIM, and DIGSTIMn.
b Click the VSTIM, ISTIM, or DIGSTIMn instance.
c From the Edit menu, choose Properties.
d Click the Implementation cell, type in the name of
the stimulus, and click Apply.
e Complete specification of any VSTIM or ISTIM
instances by selecting Properties from the Edit
menu and editing their DC and AC attributes.
Click the DC cell and type its value.
Click the AC cell, type its value, and then click
Apply.
f Close the property editor spreadsheet.
7 To change stimulus references globally for a part:
a Select the part you want to edit.
a From the Edit menu, choose Part to start the part
editor.
Pspug.book Page 262 Wednesday, November 11, 1998 1:14 PM