User Guide

Small-signal DC transfer
227
3 Specify the input source name in the Calculate
small-signal DC gain (.TF) portion of the Bias Point
dialog box.
The gain from the input source to the output variable
is calculated along with the input and output
resistances.
For example, if you enter
V(OUT2) as the output
variable and
V1 as the input source, the input
resistance for V1 is calculated, the output resistance
for V(OUT2) is calculated, and the gain from V1 to
V(OUT2) is calculated. All calculations are reported to
the simulation output file.
Pspug.book Page 227 Wednesday, November 11, 1998 1:14 PM