User Guide

Small-signal DC transfer
225
Small-signal DC transfer
Minimum requirements to run a small-signal DC
transfer analysis
Minimum circuit design requirements
• The circuit should contain an input source, such as
VSRC.
Minimum program setup requirements
1 Under Analysis type in the Simulation Settings dialog
box, select Bias Point.
2 Specify the name of the input source desired. See
Output variables
on page 7-199
for a description of
output variable formats.
3 Click OK to save the simulation profile.
4 In Capture, from the PSpice menu, select Run to start
the simulation.
Pspug.book Page 225 Wednesday, November 11, 1998 1:14 PM