User Guide

Setting up analyses
197
The waveform analyzer calculates and displays the results
of PSpice simulations for swept analyses. The waveform
analyzer also generates supplementary analysis
information in the form of lists and tables, and saves this
in the simulation output file.
Setting up analyses
To set up one or more analyses
1 From the PSpice menu, choose New Simulation
Profile.
2 Enter the name of the profile and click OK.
3 Click the Analysis tab if it is not already the active tab
in the dialog box.
4 Enter the necessary parameter values and select the
appropriate check boxes to complete the analysis
specifications.
See Part four, Viewing results,
f
or
information about using waveform analysis
in PSpice.
S
pec
ifi
c
i
n
f
ormat
i
on
f
or sett
i
ng up eac
h
type of analysis is discussed in the following
chapters.
See Output variables on
page 7-199 for a description of the
output variables that can be entered in the
Simulation Settings dialog box displayed
for an analysis type.
Specific information for setting up each
type of analysis is discussed in the following
chapters.
Pspug.book Page 197 Wednesday, November 11, 1998 1:14 PM