User Guide

Configuring model libraries
123
Note If the model libraries reside in a directory that is not on the library
search path, and you use the Browse button in step 3 to select the
libraries you want to add, then the schematic editor automatically
updates the library search path. Otherwise, you need to add the
directory path yourself. See Changing the library search path
on page 4-125 .
Changing design and global scope
There are times when you might need to change the scope
of a model library from design to global, or vice versa.
To change the scope of a design model to global
1
From the Simulation menu, choose Edit Simulation
Settings, then click the Libraries tab.
2
Select the model library that you want to change.
3
Do one of the following:
• Click the Add as Global button to add a global
entry.
• Click the Add to Design button to add a design
entry.
4
Click the Delete toolbar button to remove the local
entry.
Examp
l
e: I
f
you
h
ave an instance mo
d
e
l
that you now want to make available to
any design, then you need to change the
local model library that contains it to have
global scope.
For more information, see
Global vs.
design models and libraries on
page 4-89
.
Pspug.book Page 123 Wednesday, November 11, 1998 1:14 PM