User Guide

Chapter 4 Creating and editing models
108
Figure 32 Assorted device characteristic curves for a diode.
Adding curves for more than one temperature
By default, the Model Editor computes device curves at
27°C. For any characteristic, you can add curves to the plot
at other temperatures.
To add curves for Forward Current at a different temperature
1 In the Spec Entry frame, click the Forward Current tab.
2 From the Plot menu, choose Add Trace.
3 Type
100 (in
°
C).
4 Click OK.
The Forward Current plot should appear as shown in
Figure 33 below.
Pspug.book Page 108 Wednesday, November 11, 1998 1:14 PM