User Guide

Using the Model Editor to edit models
95
Model Editor-supported device types
Table 17 summarizes the device types supported in the
Model Editor.
Table 17 Models supported in the Model Editor
This part type...
Uses this
definition form...
And this
name prefix*...
* This is the standard PSpice device letter notation. Refer to the online
OrCAD
PSpice A/D Reference Manual
.
diode .MODEL D
bipolar transistor .MODEL Q
bipolar transistor,
Darlington model
.SUBCKT X
IGBT .MODEL Z
JFET .MODEL J
power MOSFET .MODEL M
operational amplifier**
** The Model Editor only supports .SUBCKT models that were generated by the
Model Editor. However, you can edit the text of a .SUBCKT model created
manually, or by another tool, using the Model Editor. When you load a
.SUBCKT model that the Model Editor did not create, the Model Editor
displays the text of the model for editing.
.SUBCKT X
voltage comparator** .SUBCKT X
nonlinear magnetic core .MODEL K
voltage regulator** .SUBCKT X
voltage reference** .SUBCKT X
Device types t
h
at t
h
e Mo
d
e
l
E
d
itor mo
d
e
l
s
using the .MODEL statement are based on
the models built into PSpice.
Note
The model parameter defaults used
by the Model Editor are different from
those used by the models built into PSpice.
Pspug.book Page 95 Wednesday, November 11, 1998 1:14 PM