User Guide

Chapter 3 Preparing a design for simulation
82
Check for this
• Does the relevant model library, stimulus file, or
include file appear in the configuration list?
• If the file is configured, does the default library search
path include the directory path where the file resides,
or explicitly define the directory path in the
configuration list?
If the file is not configured, add it to the list and make sure
that it appears before any other library or file that has an
identically-named definition.
To view the configuration list
1 In the Simulation Settings dialog box, click the Include
Files tab.
If the directory path is not specified, update the
default library search path or change the file entry in
the configuration list to include the full path
specification.
To view the default library search path
1 In the Simulation Settings dialog box, click the
Libraries tab.
Unmodeled pins
If you see messages like these in the PSpice Simulation
Output window,
Warning: Part part_name pin pin_name is
unmodeled.
Warning: Less than 2 connections at node
node_name.
or messages like this in the PSpice output file,
Floating/unmodeled pin fixups
then you may have drawn a wire to an unmodeled pin.
To
f
in
d
out more a
b
out
h
ow to con
f
igure
these files and about search order, see
Configuring model libraries
on
page 4-120.
To find out more about the default
configuration, see How are models
organized? on page 4-88.
To
f
in
d
out more a
b
out t
h
e
l
i
b
rary searc
h
path, see Changing the library
search path on page 4-125.
Pspug.book Page 82 Wednesday, November 11, 1998 1:14 PM