Owners manual

15
1. Make sure you understand the information in
the box at the top of this page before you
begin assembling the trampoline.
Lay two Top Tubes (1) on the ground as shown.
Make sure there is a T-Connector (2) on Top Tube (1).
Insert the small end of one Top Tube(1) into
Top tube(1) with T-connector(2).
Insert a Center(4) into the leg, slide a second leg (3)
onto the center. Insert Leg(3) into the T-connector(2).
You have now assembled one leg section.
Repeat this step to assemble ve more leg
sections.
1
Center
2
2. Note: This step requires two persons. During
this step, you will connect the six leg sec-
tions.
Hold three leg sections in the positions shown.
Insert the small end of Top Tube (1) into the
T-connector (2) on another Top Tube (1).
Repeat this step until all four leg sections are
connected.

2
2
3
3
1
1




















