User Guide

Prepare wire
Strip 1/2" (13 mm) of insulation from
each wire.
Connect wires
Attach one wire from each valve to
a “Common” (COM) wire and the
other wires to a numbered terminal
(only one wire per terminal.)
Small hole—for running 5 or 7
strand wire straight into the box
1/2", 3/4" and 1" (13 mm, 20 mm and 25 mm)
knock-outs for larger systems with more wire bundles
Knock-out for hardwired installations
Bottom View
SENSOR
COM
PUMP
2 3 4 5 6
Strip Wire
Push In
Loosen Screw
Tighten Screw
Note: We recommend you
consult an electrician for
hardwired installations.
Connect Valve Wires