User Guide

Timer Installation
Select a location
Choose a location near power and
away from direct sunlight, if possible.
Make sure to leave room for the timer
door to open completely.
This location should also have a good
Wi-Fi signal. You can check this using a
smart phone. (Find a location that has a
minimum of two bars)
Note: If replacing a timer, it is helpful
to take a photo of the wires before you
remove them from the old timer.
Mount the timer
Install a screw (included) into the
wall. Use the expanding anchors
(included) for plaster, masonry or
drywall installations. Hang the timer on
the installed screw using the keyhole
slot. Level the timer and use the
second screw in one of the preformed
mounting holes to secure the timer.
Keyhole
Pre-formed
Mounting Holes
No. 8 Screw
Wall
1/8" (3mm)
Minimum Signal