Installation Guide
DIAL—Rotate the dial to customize your watering
schedule.
+/- BUTTONS—Use these buttons to adjust
time and program.
RAIN DELAY—Press to activate Rain Delay.
ARROW—Moves cursor around the screen during
programming.
STATION—Moves between Station 1 and Station 4.
MANUAL/CLEAR—Press to water manually or
to clear programming.
RESET—Press to reset back to factory settings
OFF—Turn off all watering.
AUTO—Timer waters according to your
customized schedule.
SET CLOCK—Set the time of day.
START TIME—Select what time you would
like to start watering.
HOW LONG—Determine how long to water
HOW OFTEN—Choose how often you will water
INSTALLATION AND
PROGRAMMING INSTRUCTIONS
MOUNTING THE MANIFOLD
1. Attach support rod to manifold by inserting it
into the two mounting holes on the back of
the manifold.
2. Mark where support rod touches the wall.
3. Drill a pilot hole using a ¼-in. drill bit.
4. Attach the support rod using the screw provided.
INSTALLING THE BATTERIES
1. Detach the timer from the manifold.
2. Remove the tray on the back of the timer by
sliding or pulling it out.
3. Insert two AAA (1.5V) alkaline batteries (not
included) and replace the tray.
NOTE: Firmly replace the battery tray to ensure water
resistance and increase battery life. You will know the
battery tray is fully inserted if it does not pull out easily.
TIMER FEATURES
Used up or dead batteries must be removed from the
timer and disposed of properly. Replace batteries when
low battery icon appears on display. Do not dispose of
batteries in fire. Batteries may explode or leak.
PROGRAMMING THE TIMER
SET CLOCK AND DAY
1. Turn dial to SET CLOCK.
2. Using the +/- buttons, set the time of day,
including AM and PM. Timer advances faster if
button is held down.
3. Press the ARROW button to set current day.
4. Press the +/- buttons to move between and
select the current day of the week. Press the
ARROW button to toggle back to the time of day.
5. Turn dial to save changes
START TIME
A start time is the time of day that the timer
will begin to water. This timer features
three start times.
1. Turn dial to START TIME.
2. Press the ARROW button to move through start
times; A, B, and/or C.
3. Using the + / - buttons, set your first start time,
including AM and PM. Timer advances faster if
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit
®
.
Printed piece must meet
designated specifications
on this form.
© 2014 Orbit Inc.
This work is the property
of Orbit
®
, and cannot be
used, reproduced or
distributed in any way
without their express
permission.
Dieline
PMS
0000
Fold
PMS
0000
Product
Coverage
PMS
0000
Dims./
Callout
PMS
0000
Orbit
®
1.801.299.5555
orbitonline.com
Glue
Folded Flat Additional Information
PRIN TERS ARE
REQUIRED TO MATCH
ALL SP ECIFIED
PMS COLORS.
K
DATE: 02/16/2015
DESIGNER: SH MARKETING: SW
SOFTWARE: Adobe Indesign CS6
ARTWORK №: 5654424 rA
L:
W:
H:
0.0" W:
H:3.0"
1.5"
12.0"
6.0"
button is held down. A box is placed around each
programmed start time.
NOTE: To remove a start time press CLEAR.
4. Press the STATION button to move through
stations; 1-4.
5. Press the + / - buttons to toggle the stations
on/off.
NOTE: All stations are automatically selected when
a start time is added. Press the - button to toggle a
station off.
6. Repeat steps 2 - 5 to program additional
start times.
7. Turn dial to save changes.
NOTE: Only one start time is required.
HOW LONG
1. Turn dial to HOW LONG.
2. Press the STATION button to move through and
select a station; 1 - 4.
3. Using the +/- buttons, select watering duration
from 1 to 360 minutes for each desired station.
Timer advances faster if button is held down.
NOTE: To remove a watering duration press CLEAR.
4. Turn dial to save changes.
HOW OFTEN
Important, please read!
1 Dial 4 Outlet
HOSE FAUCET TIMER
When expecting freezing temperatures, timers
should be removed from the hose faucet and stored
indoors to avoid potential freeze damage.
Filter traps dirt particles, prolonging life of timer.
Clean filter regularly and replace if worn.
CLEAR
MANUAL
STATION
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
HOSE TAP
CONNECTION
OUTLET
(STATION) 1
OUTLET
(STATION) 2
MANUAL/
CLEAR
FILTER
DIAL
LOW
BATTERY
INDICATOR
+/- BUTTONS
ARROW
STATION
RAIN DELAY
OUTLET
(STATION) 3
OUTLET
(STATION) 4
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
PM
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
AM
STATION
1
2
3
4
A B C
START TIME
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
MINUTES
STATION
1
2
3
4
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
A B C
1. 2. 3. 4.
(1) 7 ¼-IN.
SUPPORT ROD
(1) #14 ROUND
HEAD SCREW
The manifold will not water or function while the timer
is detached from the manifold.
WARNING: Do not remove the timer from the manifold
while the timer is watering. Turn dial to OFF before
removing timer.