Instructions / Assembly

NOZZLES
•Turn water off.
• Remove old nozzle
(if necessary).
• Place filter in stem
with open end up
(see Figure A).
• Screw nozzle on.
• Pattern Ajustment
Turn the top of the
nozzle to the desired
spray pattern,
25˚–360˚
(see Figure B).
Distance Ajustment
The radius adjustment
screw in the center of
the nozzle top reduces
overspray up to 25%.
• Adjust ratchet
head stem to the
desired starting point
(see Figure C).
Figure A
Figure C
Figure B
WTM992281 53482–10 Rev a.xp 6/15/2004