Specification

ORBITONLINE.com

800-488-6156 | 801-299-5555

The 7" round irrigation valve box is built to provide both protection and easy access to vital irrigation system

components. It accommodates various types of equipment, including 3/4" and 1" valves, multi-port drip

emission devices, manual drain valves, isolation controllers, and much more. The lid stays ﬁrmly in place in

the face of heavy-duty lawn equipment, high ground water, and extreme temperature shifts.

• Pre-Built Mouse Holes—Allows for faster placement of up to 1 1/2" pipe.

• T-Top Locking Lid—Makes it quicker to take the lid on and off resulting in faster service times.

• 100% Recyclable—Some models contain pre and post-consumer recycled materials.

FEATURES AND BENEFITS

• T-Top Snap Lid—Extends all the way to the edges of the base, preventing grass and dirt from interfering

with the lid to base interface. To remove, simply pull. To replace, simply snap into place.

• HDPE Structural Foam Process—Derives from a combination of high-density polyethylene material and a

proven manufacturing process which ensures maximum strength and durability.

• UV Stabilizers—Incorporates special UV inhibitors to minimize long-term effect of sunlight.

• 2" Mouse Hole—Allows installation directly over pipe of up to 1 1/2" in diameter, creating a full enclosure

around the valve or other critical system components.

• Tapered Design—Provides maximum vertical and horizontal stability and increases interior space for easy

equipment access and maintenance.

• Multiple Color Options—Available in green, green on black, and tan, allowing you to match the box lid to

the landscape for optimum aesthetic effect.

7" ROUND

IRRIGATION VALVE BOX

SKU DESCRIPTION

53210 7" Round ICV Box Black with Green Cover

53910 7" Round ICV Box Green with Green Cover

53710 7" Round ICV Box Tan with Tan Cover

PAGE 1
7" ROUND IRRIGATION VALVE BOX The 7" round irrigation valve box is built to provide both protection and easy access to vital irrigation system components. It accommodates various types of equipment, including 3/4" and 1" valves, multi-port drip emission devices, manual drain valves, isolation controllers, and much more. The lid stays firmly in place in the face of heavy-duty lawn equipment, high ground water, and extreme temperature shifts.
PAGE 2
7" ROUND IRRIGATION VALVE BOX MATERIAL SPECIFICATIONS CIRCULAR BOX *PROPERTIES OF BASE MATERIAL ASTM TEST METHOD HDPE Tensile Strength D-638 2,700-4,400 psi (Typical Range) Flexural Modulus D-790 Min 140,000 not to exceed 240,000 psi Notched Izod Impact Strength D-256 0.5-3.0 (Typical Range) Density D-792 Min 0.95 not to exceed 0.