Product Info

Certification Information (RoHS)
We at Orbic take our social responsibility seriously and are committed to the cause of serving our
environment. It is in keeping with these commitments that we are proud to state that Orbic phones are
RoHS compliant.
Hearing Aid Compatibility Information
This device supports hearing aid compatibility refer to the gift box label for the specific rating. This phone
has been tested and rated for use with hearing aids for some of the wireless technologies it uses.However,
there may be some newer technologies that have not been tested yet for use with hearing aids.It is
important to try the different features of this phone thoroughly and in different locations, using your hearing
aid or cochlear implant, to determine if you hear any interfering noise. Ask your service provider or
the manufacturer of this phone for information on hearing aid compatibility. When some mobile phones
are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more immune than others to this interference noise
and phones also vary in the amount of interference they generate.
FCC SAR Warning
This model phone meets the government’s requirements for exposure to radio waves.
This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Government:
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. The SAR guideline includes a considerable safety margin designed to
assure the safety of all persons regardless of age and health.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is
on file with the FCC and can be found by searching for the FCC ID listed on the device label and gift box
under the Display Grant section or by searching at http://orbic.us/
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use
with an accessory that contains no metal and positions the handset a minimum of 15 mm from the body.
Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do not
use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of
15 mm from your body when the phone is switched on.
Hearing Aid Compatibility Hac For Wireless Telecommunications Devices
THIS PHONE HAS A HAC RATING OF M4/T3
WHAT IS HEARING AID COMPATIBILITY?
The Federal Communications Commission has implemented rules and a rating system designed to enable
people who wear hearing aids to more effectively use these wireless telecommunications devices. The
standard for compatibility of digital wireless phones with hearing aids is set forth in American National
Standard Institute (ANSI) standard C63.19. There are two sets of ANSI standards with ratings from
one to four (four being the best rating): an “M” rating for reduced interference making it easier to hear
conversations on the phone when using the hearing aid microphone, and a “T” rating that enables the
phone to be used with hearing aids operating in the tele-coil mode thus reducing unwanted background
noise.
Important Safety Information
Keep the phone (“Product”) away from dust, water, damp areas, precipitation and humidity. Dust, water,
liquids, precipitation and humidity may cause overheating, electrical leakage, and/or Product failure.
The Product, battery, charger and AC adapter are not waterproof. Keep them away from liquid, fuels and
chemicals. If the Product gets wet, do not place the Product in an oven, microwave or dryer, as this will
damage the Product and could cause a fire or explosion.
Only use the battery and charger approved by the manufacturer. Using other brands may cause battery
leakage, overheating, explosion or even fire. Do not use the Product where it might cause danger. Do NOT
text and drive.
Battery Use
Handle and store batteries properly to avoid injury or damage. Most battery issues arise from improper
handling and, particularly, from the continued use of damaged batteries.
• Do not disassemble or open crush, bend or deform, puncture or shred
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to
water or other liquids, expose to fire, explosion or other hazard.
• Only use the battery for the system for which it is specified
• Only use the battery with a charging system that has been qualified with the system per CTIA Certification
Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
• Replace the battery only with another battery that has been qualified with the system per this standard,
IEEE-Std-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.
• Only authorized service providers shall replace battery. (If the battery is non-user replaceable).
• Promptly dispose of used batteries in accordance with local regulations
• Battery usage by children should be supervised.
• Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and
the user suspects damage, take it to a service center for inspection.
• Improper battery use may result in a fire, explosion or other hazard.
• The maximum operating temperature is 40°C.
Note: The battery shall only be serviced by the manufacturer.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries in
accordance with local regulations.
Cleaning and Maintenance
The Product, the battery and the charger are not waterproof. Do not use them in places with high humidity
like a bathroom and also avoid spilling any liquids on the Product, battery or charger. Use a soft cloth to
clean the Product, the battery and the charger. Do not use alcohol, diluted liquid or benzene to clean the
Product.
Disposal of Product and Batteries
Follow local regulations regarding disposal of mobile devices and batteries. In some areas, the disposal
of these items in household or business trash may be prohibited. Please follow your local regulations and
recycle Product if required Batteries must be recycled or disposed of properly.