Product Instruction
Table Of Contents
- 1.Product hardware specification
- 2.Product picture
- 3. Introduction to the use of EMMC module
- 4.Introduction to the use of POE module
- 4.1Module Picture
- 4.2POE module support IEEE802.3af， IEEE802.3af is a n
- 4.3Complete the installation of the poe module on the
- 4.4How to use the zora E1 development board with poe
- A.Use a switch or router that supports the 802.11af
- B.You can transmit data and power through the networ
- C.The zora E1 development board is working properl
- 4.5
- 5.Zora E1 product usage scenario
- 6.Download of burning tools and firmware
- 8.Hardware data
1. Product hardware specification
CPU
Amlogic S905D3 Quad-core Cortex-A55 1.9GHz
GPU
Mali-G31MP2 GPU 800MHz，Support OpenGL ES3.2, Vulkan 1.0, OpenCL 2.0
NPU
1.2 TOPS,Support 8bit/16bit,Support TensorFlow、Caffe
DDR memory
LPDDR4/4X 2G ,Support eMMC 5.1，16G,32G,64G
Multi
Media
Supports 4K VP9 and 4K 10bits H265/H264 video decoding, up to 60fps
1080p Multiformat Video Decoding (VC-1, MPEG-1/2/4, VP8)
1080p video coding, supports H.264 focus VP8 format
Video post-processor: de-interleaving, denoising, edge / detail / color
optimization
Camera
interface
1 x 2 lane MIPI-CSI
USB
2 x USB 3.0 Type A (two stack share one bandwidth)
2 x USB 2.0 Type A (host)
串口
serial
port
2 x UART through GPIO
Display
interface
1 x HDMI 2.1 (audio output is supported)
1 x 2 lane MIPI-DSI (up to 1920x1080)
Wireless
interface
WiFi/Bluetooth two-in-one module:
WiFi 2.4GHz/5GHz，Bluetooth 5.0
Wired
network
interface
RJ45 (10/100/1000M) x 1, need to support PoE through expansion card, wake
on lan (WOL)
Microphone
interface
On board microphone