User Manual

ORX 2.4GHz Transmitter Module User’s Manual

Thanks for your purchase ORX 2.4GHz Transmitter Module; this design updates your

transmitter to DSM2/DMSX 2.4GHz technology. There are three types; one for JR style

transmitters, one for Futaba style transmitters, and a third which is configured for the DlY’er.

Check your transmitter and pick the right module type for your use. ORX 2.4GHz Transmitter

Modules work with all DSM2/DSMX aircraft receivers.

Important Module Usage Information

* Be sure the transmitter is in PPM mode.

* Never power on the ORX 2.4GHz Transmitter Module without antenna.

* Power the transmitter on first and wait for the beeps, then power on your receiver.

* Before operating, make sure the receiver is properly bound to the transmitter module.

* Before flying, always confirm that the module’s working mode is correct for your receiver.

* Before flying, always perform a range check first.

PAGE 1
ORX 2.4GHz Transmitter Module User’s Manual Thanks for your purchase ORX 2.4GHz Transmitter Module; this design updates your transmitter to DSM2/DMSX 2.4GHz technology. There are three types; one for JR style transmitters, one for Futaba style transmitters, and a third which is configured for the DlY’er. Check your transmitter and pick the right module type for your use. ORX 2.4GHz Transmitter Modules work with all DSM2/DSMX aircraft receivers.
PAGE 2
ORX 2.4GHz Transmitter Module Working Modes The ORX 2.4GHz Transmitter Module has four working modes. Turn the transmitter on and the green LED on the module will indicate the current working mode (see the table below). LED OFF flashes flashes flashes Working Mode DSM2 1024/22ms DSM2 2048/11ms DSMX 22ms DSMX 11ms Before binding the ORX 2.4GHz Transmitter Module, check your receiver specifications and select the proper ORX 2.4GHz Transmitter Module working mode.
PAGE 3
Range Check With the model resting on the ground, stand 30 paces away (approx. 90 feet/28 meters). Press and hold the BIND button, you should have total control your model with the button depressed. Change ORX 2.4GHz Transmitter module ID Every ORX 2.4GHz Transmitter module has one GUID (Globally Unique Identifier), no another ORX 2.4GHz Transmitter will share it. The ORX 2.4GHz Transmitter module still has a Change ID button as a safeguard.