User manual

e Charge indicator light

f Low charge indicator light

g Charging unit (basic charger and brush head compartment with

protective cover)

h SmartGuide

i SmartGuide holder

j Wall mount

k Adhesive ring

Specification

For voltage specifications refer to the bottom of the charging unit.

Connecting and charging

Your toothbrush has a waterproof handle, is electrically safe and designed

for use in the bathroom.

• Plug the charger (g) into an electrical outlet and place the toothbrush

handle (d) on the charging unit.

• The green charge indicator light (e) flashes while the handle is being

charged. Once it is fully charged, the light turns off. A full charge can take

up to 22 hours and enables up to seven days of regular brushing (twice a

day, 2 minutes) (picture 1).

Note: After deep discharge, the charge indicator light might not flash

immediately; it can take up to 10–15 minutes.

• If the rechargeable battery is low the red charge indicator light (f) is

flashing for some seconds when turning your toothbrush on/off.

• For everyday use, the toothbrush handle can be stored on the charging

unit to maintain it at full power. Overcharging is impossible.

• To maintain the maximum capacity of the rechargeable battery, unplug

the charging unit and fully discharge the handle with regular use at least

every 6 months.

SmartGuide adjustments

The SmartGuide (h) comes with a demonstration mode. Deactivate this mode

by removing the compartment cover in the back (picture A) and push the

«set» or «h/min» button. A flashing «12:00» indicates that you can now adjust

the clock time.

Note: If the SmartGuide display is blank before first use (no active demon-

stration mode/no batteries inserted) the batteries will need to be replaced/

inserted before continuing. Batteries are supplied.

96533982_D21_WE_S6-136.indd 20 04.12.13 09:26

CSS APPROVED Effective Date 19Dec2013 GMT - Printed 28May2014 Page 20 of 136