User's Manual

Installation Hardware Accessories
44 SPARC/CPU−56T
4. Fasten screws
Finish
Reinstalling I/O Board
Start
1. Plug I/O board onto PMC connectors of CPU board
2. Fix it by fastening the 14 screws which you previously have removed
Finish
Memory Modules
The main memory capacity is adjustable via installation of a Force Computers memory
module. Currently the SPARC/MEM−550 is available for the CPU−56T. It provides 1
GByte memory .
a
Before installing the memory module you have to remove the I/O board and afterwards
you have to reinstall it. How this is done is described in the previous section "PMC
Modules".
The memory module has to be installed into the connectors P8 and P9.a
P8
P9