User Guide

ManualsBrandsOracle ManualsOtherH09993100

100

You should include the following slave definition immediately after the <native

name=”Native Directory”>

declaration:

<slave>

<url>ldap://

<slave_host_name>

:58089</url>

<type>failover</type>

</slave>

</slaves>

Where

<slave_host_name>

is the name of the slave server machine and 58089 is the Native

Directory port.

8 On the master server and then on the slave server, start the Hyperion S9 OpenLDAP service or process.

9 On the master server, start the slurpd replication service or process by performing an action:

● On Windows, execute the following command from a command prompt window.

openLDAP_Home

>\slurpd -f

<master_slapd_config_file>

Example: C:\Hyperion\SharedServices\9.3.1\OpenLdap\slurpd -f

slapd.conf

● On UNIX, execute the following command after navigating to <

openLDAP_Home

>/usr/

local/libexec

./slurpd -f <

openLDAP_Home

>/usr/local/etc/openldap/slapd.conf -t

<openLDAP_Home>

/usr/local/var/openldap-slurp —d 1

Example: ./slurpd -f /var/Hyperion/SharedServices/9.3.1/openLDAP/ usr/

local/etc/openldap/slapd.conf -t /app/Hyperion/SharedServices/9.3.1/

openLDAP/usr/local/var/openldap-slurp —d 1

Note:

slurpd

must always be running to synchronize data between the master and slave servers.

Cold Standby Deployment

In cold standby deployment (see following illustration), the primary environment consists of

Shared Services (1) including Native Directory (2) and one or more Hyperion products (3). The

standby environment consists of an inactive Native Directory (5) instance. The instances in

primary and standby environments connect to a Native Directory database (6) hosted on the

same physical hard drive that is dual attached to the primary and standby environments.

This deployment uses a hardware load balancer (4) to perform these tasks:

● Detect the failure of the Native Directory instance in the primary environment

● Start the Native Directory service (Windows) or process (UNIX) in the standby environment

● Route all requests to the standby Native Directory instance

Managing Native Directory