User Guide

7 Test the SAP provider configuration. See “Testing User Directory Connections” on page 53.
8 Add the SAP provider to the search order used by Shared Services. See “Adding a User Directory to the
Search Order” on page 55 for details.
9 Specify global settings if needed. See “Setting Global Parameters” on page 57 for details.
Configuring an NTLM User Directory
Before starting these procedures, meet all the prerequisites in “Using NTLM to Support SSO”
on page 28.
➤ To configure an NTLM user directory:
1 Launch the User Management Console. See “Launching User Management Console” on page 33.
2 Select Administration > Configure User Directories.
The Defined User Directories screen that lists all the configured user directories, including Native
Directory, opens.
3 Click Add.
4 In Directory Type select NT LAN Manager (NTLM) and click Next.
The NTLM Connection Information screen opens.
5 Enter the required configuration parameters in the NTLM Connection Information screen.
Table 5 NTLM Connection Information Screen
Label
Description
Name A unique configuration name for the NTLM user directory. You use this name to identify the directory
in situations where multiple NTLM directories are configured with Shared Services.
Example:
MY_NTLM_DIRECTORY
Configuring an NTLM User Directory
49