Computer Hardware User Manual

2 Sun StorageTek ATCA 4Gb FC Dual Port HBA Installation Guide • April 2010
TABLE 1-1 HBA Features and Specifications
Feature Description
AMC connector B+
PCI signaling environment PCI Express x4 (4 active lanes)
PCI transfer rate (maximum) PCI Express Generation One (2.5 Gbits/sec) x4
Number of FC buses Two
Number of devices supported 126 devices per FC loop; 510 devices in Fabric mode
FC bus type (external) Fiber-optic media, short-wave, multi-mode fiber
(400-M5- SN-S)
FC transfer rate 400 MBps per port maximum, half-duplex
800 MBps per port maximum, full-duplex
RAM 1.5 MB, parity protected, per port
BIOS ROM One 4-MB flash ROM, field-programmable
NVRAM One 2-KB EEPROM, field-programmable
External connectors Two Small-Form Factor (SFF) multimode optic with LC-
style connectors
Maximum FC cable length 1 Gbps: 500 meters using 50/125 µm core fiber
300 meters using 62.5/125 µm core fiber
2 Gbps: 300 meters using 50/125 µm core fiber
150 meters using 62.5/125 µm core fiber
4 Gbps: 150 meters using 50/125 µm core fiber
70 meters using 62.5/125 µm core fiber
LED indicators Two LEDs per channel (yellow and green) on the front
panel as status indicators. Three AMC LEDs: one blue
LED for hot-swap, one red LED for out-of-service, and
one green LED for in-service.
Form Factor AdvancedMC, single wide