Computer Hardware User Manual

17
CHAPTER
3
HBA Software Installation
This chapter describes the Solaris driver software that is required to support the
HBA. The chapter contains the following section:
“Installing Software for the Solaris OS” on page 17
“Installing Software for the Wind River Linux OS” on page 18
“Installing Software for the Red Hat Enterprise Linux OS” on page 19
Installing Software for the Solaris OS
The HBA driver is included in the Solaris 10 6/06 (s10u2) release, at minimum. This
Solaris 10 6/06 release, and later releases, require nothing from the user.
Solaris 10 1/06 (s10u1) is required to support the HBA on minimum supported
versions of Solaris for x64/x86 systems. If you are using the Solaris 10 1/06 release,
install patch 120222-21 or 120223-21 to install the HBA driver. Patches are available
at http://sunsolve.sun.com.
To Install or Update the Driver From a Patch
1. Log in as the root user.
2. Navigate to the directory that contains the patch.
3. Add the latest patch by typing the following at the command prompt.
# patchadd patch-name