Computer Hardware User Manual

66 Sun Dual 10GbE XFP PCI Express Card User’s Guide • May 2010
2. Plumb Oracle’s Sun x8 Express Dual 10 Gigabit Ethernet Fiber XFP Low Profile
Adapter interface:
where
xxx.xxx.xx.xxx = the IP address of the interface.
3. Insert the VLAN module:
4. Add the VLAN instance (VID):
5. Configure the nxge VLAN (eth2 in this example):
where
xxx.xxx.xx.xxx = the IP address of the interface.
# ifconfig eth2 xxx.xxx.xx.xxx up
# /sbin/modprobe 8021q
# /sbin/vconfig add eth2 5
# ifconfig eth2.5 xxx.xxx.xx.xxx up