Express Station (Model: MICROS Express Station 4) Basic Operation Guide Page 1
Table of Contents Overview of Express Station ............................................................................................................. 3 Getting to know your Express Station .......................................................................................... 3 MICROS Express Station 4 – Hardware Specification ................................................................. 6 Using Your Express Station ...............................................................................
Overview of Express Station Here introduce ORACLE new generation of Express Station, model MICROS Express Station 4. Getting to know your Express Station MICROS Express Station 4 Front View Figure 1-1: MICROS Express Station 4 Overview Power button with LED indicator 23.8” LCD or 23.
MICROS Express Station 4 Rear View Figure 1-2: MICROS Express Station 4 Rear View Hook (4 in total), to install the Express Station on the Stand or VESA mount Finger Print module (optional) Page 4
MICROS Express Station 4 I/O View Figure 1-3: MICROS Express Station 4 I/O View IDN IDN port for signal output to IDN printer COM 1 Serial port USB3, USB4 Dual USB 3.0 port USB1, USB2 Dual USB 2.
MICROS Express Station 4 – Hardware Specification Specification Processor Memory Display with touch screen Network WIFI&BT (optional) RFID (optional) MSR (optional) Finger print (optional) Button/Switch Rating Weight Dimension Storage Temperature Operating Temperature Operating Humidity Parameter Two alternate CPU Intel® Atom™ x7-E3950 (1.6GHz), or Intel® Atom™ x5-E3930 (1.3GHz), Installed memory (RAM) 4GB Up to 128GB SSD LCD display Type: TFT, supports transmissive display mode Size: 23.
Using Your Express Station Positioning Your MICROS Express Station 4 1. Mounting your Express Station on the Docking Station / Stand 1. Place the docking station on a flat surface as a table or desk. 2. Align and insert the Station on the docking plate, make sure all of four hooks securely attach to the mounting holes of docking station. 3. The lock button firmly MICROS Express Station 4 Docking Station Figure 2-1: Positioning the Express Station to docking station 4.
Working with Windows® 10 Starting for the first time When you start your MICROS Express Station 4 for the first time, a series of screens may appear to guide you configuring the basic setting of your Windows® 10 operating system. Follow the instructions to configure. Once you are done configuring the basic items, a Windows® 10 Start screen appears after successfully signing in to your user account. It helps organize all the programs and applications you need in just one place.
Appendix – Regulatory Caution FCC Class A Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
reduce the potential for harmful interference to co-channel mobile satellite systems; les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii)the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p.
