Instruction Manual

2 Wrangler Rock Slider Skid Plate - Kit 87007
2. Skid Plate Installation: Place 1/2” hardware with
skid plate into center holes of crush zone. Tighten
all skid plate hardware..
Push Clips Splash Guard
Push Clips
Crush Zone
Sway Bar Disconnect
Mounting Holes
Install Skid Plate
3. Stock bumpers & splash sheilds Installation
a. Install thick washer between crush zone and
skid plate to give the skid plate the proper
spacing for the electronic sway bar disconnect.
b. Install four bolts, two push clips and lower
splash guard from lower crush zone and front
bumper.
Push Clips Splash Guard
Push Clips
Crush Zone